Doyon JAOP6 Bedienungsanleitung PDF herunterladen (Seite 25)

A-22

When a Cook Program is used, if the timer is inactive, the oven is considered idle

(but it still maintains the set point). In Manual Mode, the timer is used only as a

reminder, this mode can cook without using the timer.

Display/LED

□ The 1st line display depends on which view is selected:

○ Time View

■ Current time left in step is displayed, except in the last step, where hold time is

displayed.

○ Temperature View

■ Cavity temperature.

○ Default View:

■ Current program name is displayed, except in last step, where PRODUCT READY is

displayed.

□ 2nd line shows current step number if oven is active.

□ Heat, Fan, Steam LED follows output state.

Keys

□ Note : Any changes to the various oven parameters in this mode will not be stored, but will

simply take effect in the current step. This allows “tweaking” recipes from time to time

due to product variations or other factors. For changes to be stored, program mode must

be used.

□ Press Temperature key to toggle the current view between Default, Cavity Probe and Food

Probe.

□ Press Time key:

○ Recipe active: toggles between default and remaining step time.

○ Last Step: toggles between the default and holding time.

□ 3-second long press of Temperature key to change set point (using Up/Down keys).

○ If enabled, a second press of the Temperature key will display the food probe setting.

□ 3-second long press of Time key to change timer’s value (using Up/Down keys).

□ Press Start key to start timer countdown (and rack rotation, if enabled).

□ 3-second long press of Next key to skip to next step.

□ 3-second long press of Previous key to go back to previous step.

□ Press Stop key to cancel countdown and return to idle.

□ 3-second long press of Stop key to go into Cool Down mode.

□ In Manual Mode only, Fan, Rack, Steam and Auto-Steam keys can be used to toggle their

respective output states.

□ Auto-Steam key will start/stop the auto-steam according to Low-level Steam Override TON

and TOFF parameters.

□ If oven is idle, a 5-second long press of the

Program key will enable Program Mode for the

currently selected Cook Program (or Manual Program).

□ When last step timer expires, the unit beeps 5 times and displays PRODUCT READY.

Pressing Stop red key will clear the message and resume idle.

COOK MODE

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 59 60

Kommentare zu diesen Handbüchern

Keine Kommentare

Doyon JAOP6 Bedienungsanleitung Seite 25

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Ofen Doyon JAOP6